سوییچ سیسکو سری Industrial Ethernet 3000

سوییچ سیسکو سری Industrial Ethernet 3000

۱,۰۰۰ تومان

سوییچ سیسکو سری Industrial Ethernet 3000 یک خانواده از سوییچ های Layer 2 و Layer 3 است که رهبری سیسکو را در تعویض به برنامه های صنعتی اترنت با ویژگی های نوآورانه، امنیت قوی و سهولت استفاده فوق العاده به ارمغان می آورد.

 

۱,۰۰۰ تومان
  • توجه:بدلیل نوسانات قیمت، تماس قبل از خرید الزامی می باشد

چکیده

سوییچ سیسکو سری Industrial Ethernet 3000 یک خانواده از سوییچ های Layer 2 و Layer 3 است که رهبری سیسکو را در تعویض به برنامه های صنعتی اترنت با ویژگی های نوآورانه، امنیت قوی و سهولت استفاده فوق العاده به ارمغان می آورد.

 

توضیحات

سوییچ سیسکو سری Industrial Ethernet 3000


سوییچ سیسکو سری Industrial Ethernet 3000 یک خانواده از سوییچ های Layer 2 و Layer 3 است که رهبری سیسکو را در تعویض به برنامه های صنعتی اترنت با ویژگی های نوآورانه، امنیت قوی و سهولت استفاده فوق العاده به ارمغان می آورد. ویژگی های سیسکو IE 3000 Series:
● طراحی صنعتی و انطباق● ابزار برای استقرار آسان، مدیریت و جایگزینی● امنیت شبکه بر اساس استانداردهای باز● ادغام فناوری اطلاعات و شبکه های اتوماسیون صنعتیسوییچ سیسکو سری Industrial Ethernet 3000 یک محصول ایده آل برای برنامه های کاربردی صنعتی اترنت است، از جمله اتوماسیون کارخانه، کنترل انرژی و کنترل فرایند و سیستم های حمل و نقل هوشمند (ITS ها).

سوییچ سیسکو سری Industrial Ethernet 3000 ارائه می دهد:


● طراحی برای برنامه های کاربردی صنعتی اترنت، از جمله محدوده های زیست محیطی، شوک / لرزش و رنج های بالا؛ یک مجموعه کامل از گزینه های قدرت ورودی خنک کن و DIN-rail یا 19 “نصب قفسه
● پشتیبانی از Power over Ethernet (PoE) تا 15.4W در هر پورت● پشتیبانی از Power over Ethernet Plus (PoE +) برای دستگاه های PoE + تا 30 وات در هر پورت● نصب و راه اندازی آسان و مدیریت با استفاده از نرم افزار سیسکو DNATM مرکز و مدیر وب سیسکو مدیریت وب و ابزارهای پشتیبانی، از جمله دستیار شبکه سیسکو (CNA) و سیسکو اولویت LMS 4.2● جایگزینی سوییچ آسان با استفاده از حافظه قابل جابجایی، اجازه می دهد تا کاربر را به جای سوئیچ بدون نیاز به تنظیم مجدد● در دسترس بودن بالا، جبرگرایی تضمین شده و امنیت قابل اعتماد با استفاده از نرم افزار Cisco IOS®● تنظیمات نرم افزاری نرم افزار برای برنامه های کاربردی صنعتی که می تواند با لمس یک دکمه اعمال شود

● مطابقت با طیف گسترده ای از مشخصات صنعتی اترنت شامل اتوماسیون صنعتی، ITS، پست، راه آهن و دیگر بازارها

● پشتیبانی از IEEE1588v2، یک پروتکل زمانی دقیق با دقت نانوحافظی برای برنامه های کاربردی با کارایی بالا

● تسریع حلقه بهبود یافته با پشتیبانی از پروتکل اترنت انعطاف پذیر (REP)

● ادغام IT شفاف با پشتیبانی پروتکل های مسیریابی لایه 3 (خدمات IP)

● گواهینامه PROFINET v2، با انطباق کلاس B مطابقت PROFINET

● صدور گواهینامه صنعتی صنعتی ABB


پیکربندی سوییچ سیسکو سری Industrial Ethernet 3000

 

نرم افزار Cisco IE 3000 Series براساس نرم افزار سیسکو IOS مجموعه ای کامل از خدمات هوشمند است که از قابلیت دسترسی بالا، کیفیت سرویس (QoS) و ویژگی های امنیتی پشتیبانی می کند.

سوییچ سیسکو سری Industrial Ethernet 3000

جدول 1. سوییچ IE 3000 سیسکو

Description

 

Specification

Cisco IE-3000-4TC

سوییچ سیسکو سری Industrial Ethernet 3000

●  4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one active port either 10/100/1000 copper or SFP fiber
●  Support up to two expansion modules with various combinations
●  DC input range 18VDC-60VDC
●  Layer 2 LAN Base Image

Cisco IE-3000-4TC-E

●  Same as IE-3000-4TC with Layer 3 IP Services Image

Cisco IE-3000-8TC

سوییچ سیسکو سری Industrial Ethernet 3000

●  8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one active port either 10/100/1000 copper or SFP fiber
●  Support up to two expansion modules with various combinations
●  DC input range 18VDC-60VDC
●  Layer 2 LAN Base Image

Cisco IE-3000-8TC-E

●  Same as IE-3000-8TC with Layer 3 IP Services Image

Cisco IEM-3000-8TM

Cisco IE-3000-4TC-E

●  Expansion copper Module for Cisco IE-3000-4TC,IE-3000-8TC,IE-3000-4TC-E,and IE-3000-8TC-E switches,eight 10/100 TX ports

Cisco IEM-3000-8

Cisco IE-3000-8TC

●  Expansion FX Fiber Module for Cisco IE-3000-4TC,IE-3000-8TC,IE-3000-4TC-E,and IE-3000-8TC-E switches,eight 100 FX ports

Cisco PWR-IE50W-AC

Cisco IE-3000-8TC-E

●  Expansion Power Module for Cisco IE-3000-4TC,IE-3000-8TC,IE-3000-4TC-E and IE-3000-8TC-E switches,supports input AC 100-240V/1.25A or Input DC 125-250V/1A,Output DC 24V/2.1A,DIN-Rail Mount,compatible with PWR-IE3000-AC

Cisco PWR-IE50W-AC-IEC=

Cisco IEM-3000-8TM

●  Expansion Power Module for Cisco IE-3000-4TC,IE-3000-8TC,IE-3000-4TC-E and IE-3000-8TC-E switches,supports Input AC 100-240V/1.25A 50-60Hz,Output DC 24V/2.1A,IEC Plug,DIN-Rail Mount

Cisco IEM-3000-4SM=

Cisco IEM-3000-8FM

●  Expansion SFP Module for IE-3000-4TC,IE-3000-8TC,IE-3000-4TC-E,and IE-3000-8TC-E switches,4 100MB SFP ports
●  Minimum IOS release 15.0(2)EY

Cisco IEM-3000-8SM=

Cisco PWR-IE50W-AC

●  Expansion SFP Module for IE-3000-4TC,IE-3000-8TC,IE-3000-4TC-E,and IE-3000-8TC-E switches,8 100MB SFP ports
●  Minimum IOS release 15.0(2)EY

Cisco IEM-3000-4PC=

Cisco PWR-IE50W-AC-IEC=

●  Expansion PoE module for IE-3000-4TC,IE-3000-8TC,IE-3000-4TC-E,and IE-3000-8TC-E switches,support 4 ports 10/100 PoE/PoE+. External power source is required (44-57 VDC for PoE/50-57 VDC for PoE+)
●  Minimum IOS release 15.0(2)EY2

Cisco IEM-3000-4PC-4TC=

Cisco IEM-3000-4PC-4TC=

●  Expansion PoE module for IE-3000-4TC,IE-3000-8TC,IE-3000-4TC-E,and IE-3000-8TC-E switches,support 4 ports 10/100 PoE/PoE+ and 4 ports non-PoE ports. External power source is required (44-57 VDC for PoE/50-57 VDC for PoE+)
●  Minimum IOS release 15.0(2)EY2

Cisco PWR-IE65W-PC-AC=

Cisco PWR-IE65W-PC-AC=

●  AC-DC Power Module for PoE solution,Input AC 100-240V/1.4A,50-60Hz or Input DC 125-250V/1A. Output 54VDC/1.2 A,DIN-Rail Mount

Cisco PWR-IE65W-PC-DC=

Cisco PWR-IE65W-PC-DC=

●  DC-DC Power Module for PoE solution,Input DC 18-60 V/4.3A,Output DC 54V/1.2A,DIN-Rail Mount

 

برنامه های صنعتی اترنت


سیسکو IE 3000 سری جدید محصول ایده آل برای انواع برنامه های صنعتی اترنت است:

● اتوماسیون صنعتی:سیسکو IE 3000 طراحی شده است تا از یک مجموعه گسترده ای از پروتکل های صنعتی اترنت برای اتوماسیون پشتیبانی کند. سیسکو IE 3000 ویژگی PLC طراحی فاکتور فرم با امتیاز های زیست محیطی توسعه یافته، خنک کنشی، نصب DIN-rail، ورودی برق اضافی 24VDC، رله های هشدار دهنده و ایمنی ولتاژ و سر و صدا است. نرم افزار و ابزار پیکربندی سیسکو IE 3000 اجازه می دهد برای نصب آسان، بهینه سازی شده برای برنامه های صنعتی اترنت (به عنوان مثال، EtherNet / IP). کنترل چندگانه، اولویت بندی ترافیک و ویژگی های امنیتی در قالب پیش فرض برای این پروتکل ها توصیه می شود.

● ITS:اینترنت اکسپلورر سیسکو 3000 از ITS و دیگر برنامه های کاربردی برای کنترل ویدئوهای خارجی و سیستم های حمل و نقل و حمل و نقل پشتیبانی می کند. سوئیچ پشتیبانی از انطباق با NEMA TS-2، انواع فیبرهای گیگابیتی uplinks، و گزینه های ورودی AC و DC، در حالی که نرم افزار Cisco IOS از ویژگی های مهم ITS، از جمله شبکه مجازی (VLAN)، QoS، پروتکل مدیریت گروه اینترنت (IGMP) snooping، و لیست امنیت کنترل دسترسی (ACLs).

● زیرساخت ها:سیسکو IE 3000 کاملا سازگار با مشخصات اتوماسیون پست، از جمله IEC61850 و IEEE1613 است. سوئیچ از بازیابی حلقه با سرعت بالا پشتیبانی می کند. دسترسی فیبر و پورت های uplink؛ AC، DC، و انواع گزینه های ورودی برق برای محیط های پست.

● برنامه های کاربردی دیگر:سیسکو IE 3000 را می توان در راه آهن، نظامی، مترو اترنت و سایر برنامه های کاربردی که نیاز به محیط زیست منحصر به فرد، فاکتور فرم و یا ورودی های انرژی در محیط های سخت است.

جدول 2 ویژگی ها و مزایای سیسکو IE 3000 Series را ارائه می دهد. جدول 3 مشخصات سخت افزاری را ارائه می دهد و جدول 4 مشخصات قدرت را نشان می دهد. جدول 5 جزئیات مربوط به پشتیبانی مجوز DNA Essentials را ارائه می دهد، جدول 6 لیست اپلیکیشن های پشتیبانی شده را ارائه می دهد و جدول 7 اطلاعات ایمنی و انطباق را ارائه می دهد.

 

جدول 2. ویژگی ها و مزایای سیسکو IE 3000 سری

Category

Feature/Benefit

Designed for industrial applications

●  Extended temperature,vibration,shock and surge,and noise immunity ratings comply to specifications for automation,ITS,and substation environments.
●  Compact,PLC-style form factor is ideal for deployment in industrial environments.
●  DIN-rail,wall,and 19” rack mount options allow for deployments in a variety of control systems.
●  Variety of power input options covers a wide range of power requirements for Industrial Ethernet applications.
●  Up to 300 deployment configurations,supporting a range of access port densities,copper and fiber uplinks,fiber access ports,and power input,deliver flexibility in deployment.
●  Support for SFP modules provides uplink connectivity supporting 100BASE-LX,100BASE-FX,1000BASE- SX,1000BASE-LX,and 1000BASE-ZX options.
●  Alarm relay contacts can be used for an external alert system.

Ease of deployment,management,and replacement

Cisco DNACenter enables centralized network management with automation and assurance features. Cisco IE 3000 Series supports DNA Essentials subscription licenses with 3- and 5-year term options.https://www.cisco.com/c/en/us/products/cloud-systems-management/dna-center/datasheet-listing.html
●  Cisco Express Setup simplifies initial configuration with a web browser,eliminating the need for more complex terminal emulation programs.
●  Cisco Smartports templates provide the option to apply a default global or interface-level macro with a recommended configuration,allowing the user to easily set up the switch in a configuration optimized for the specific application.
●  Smartports templates for EtherNet/IP provide an optimized setup for these Industrial Ethernet protocols at the touch of a button.
●  Swappable Flash memory is ideal for quick and easy switch replacement. Memory can be moved from one switch to another,so a switch can be replaced without the need to reconfigure software features.
●  The Cisco IE 3000 can be managed by PROFINET based management tools. The IE 3000 has PROFINET v2 certification,with PROFINET conformance class B compliance.The IE3000 supports PROFINET QoS on PROFINET default VLAN to prioritize PROFINET real time packets
●  Simple Network Management Protocol (SNMP) (v1/v2/v3) support allows for management using traditional IT-based management tools,including CiscoWorks.
●  Device Manager allows web-based switch configurations.
●  DHCP port-based allocation retains the IP address on a per port basis and simplifies the end-host replacement in an industrial setting.
●  HTTPS access
●  Embedded Event Manager (EEM) provides real-time network event detection and on board automation
●  Cisco Network Assistant (CNA) is a no-charge,Windows-based application that simplifies the administration of networks of up to 250 users. It supports the Cisco IE 3000 and a wide range of Cisco Catalyst®intelligent switches. With CNA,users can manage Cisco Catalyst switches and launch the device managers of Cisco integrated services routers and Cisco Aironet®WLAN access points. Configuration wizards need just a few user inputs to automatically configure the switch to optimally handle different types of traffic:control,voice,video,multicast,and high-priority data. For detailed CNA support information,please go tohttps://www.cisco.com/en/US/products/ps5931/prod_release_notes_list.html
●  Cisco Prime LMS support. For detailed information,please go tohttps://www.cisco.com/en/US/products/ps11200/products_device_support_tables_list.html

Availability and scalability

●  Virtual LANs (VLANs) allow for logical segmentation for a network for optimal use of bandwidth.
●  802.1q trunking.
●  QoS classifies and prioritizes data,guaranteeing determinism for mission-critical data.
●  IGMPv3 snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive traffic to only the requestors. An additional querier allows this operation in a Layer 2 only environment.
●  IGMP filtering provides multicast authentication by filtering out no subscribers and limits the number of concurrent multicast streams available per port.
●  Per-port broadcast,multicast,and unicast storm control prevents faulty end stations from degrading overall systems performance.
●  IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and loop-free networks simplifies network configuration and improves fault tolerance.
●  EtherChannel LACP support for quick recovery and bandwidth utilization.
●  FlexLinks for fast recovery.
●  Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant,failsafe routing topologies.
●  Resilient Ethernet Protocol,scalable up to 130 nodes with a very fast convergence,50ms.

Security

●  IEEE 802.1x with VLAN assignment,guest VLAN,and voice VLAN allows dynamic port-based security,providing user authentication.
●  Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports.
●  MAC address filtering prevents the forwarding of any type of packet with a matching MAC address.
●  Secure Shell (SSH) Protocol v2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.
●  TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration.
●  MAC address notification allows administrators to be notified of users added to or removed from the network.
●  Dynamic Host Configuration Protocol (DHCP) snooping allows administrators to help ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database and to rate limit the amount of DHCP traffic that enters a switch port.
●  DHCP Interface Tracker (Option 82) augments a host IP address request with the switch port ID.
●  Port security secures the access to an access or 802.1q trunk port based on MAC address.
●  After a specific time frame,the aging feature removes the MAC address from the switch to allow another device to connect to the same port.
●  Trusted Boundary provides the ability to trust the QoS priority settings if an IP phone is present and to disable the trust setting if the IP phone is removed,thereby preventing a malicious user from overriding prioritization policies in the network.
●  Up to 512 ACLs are supported,with two profiles:Security (384 Security ACL entries and 128 QoS policies) and QoS (128 Security ACL entries and 384 QoS polices).
●  Cisco standard and extended IP security router ACLs define security policies on routed interfaces for control- plane and data-plane traffic.
●  Dynamic ARP Inspection helps ensure user integrity by preventing malicious users from exploiting the insecure nature of the ARP protocol.
●  DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses. This feature is used by other primary security features to prevent a number of other attacks such as ARP poisoning.
●  IP source guard prevents a malicious user from spoofing or taking over another user’s IP address by creating a binding table between client’s IP and MAC address,port,and VLAN.
●  Support for private VLANs and SXP (SGT Exchange Protocol).

High-performance IP routing

●  Inter-VLAN IP routing for full Layer 3 routing between 2 or more VLANs.
●  Basic IP unicast routing protocols (static,Routing Information Protocol Version 1 [RIPv1],RIPv2 and RIPng).
●  Advanced IP unicast routing protocols (Open Shortest Path First [OSPF],Interior Gateway Routing Protocol [IGRP],Enhanced IGRP [EIGRP],Border Gateway Protocol Version 4 [BGPv4],and Intermediate System-to- Intermediate System [IS-IS]) are supported for load balancing and constructing scalable LANs.
●  Protocol Independent Multicast (PIM) for IP multicast routing is supported,including PIM Sparse Mode
(PIM- SM),PIM Dense Mode (PIM-DM),and PIM sparse-dense mode.
●  Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing.
●  IPv6 routing (OSPFv6 and EIGRPv6) support in hardware for maximum performance.
●  Policy-Based Routing (PBR) allows superior control by facilitating flow redirection regardless of the routing protocol configured.
●  HSRP provides dynamic load balancing and failover for routed links;up to 32 HSRP links supported per unit.
●  Support for 1000 multicast groups.
●  VRF-Lite virtualization.

جدول 3. سیسکو IE 3000 سری سخت افزار سوییچ

Description

Specification

Performance

●  Wire-speed switching,16 Gbps switching fabric
●  Forwarding rate based on 64-byte packets:6.5 Mpps
●  128 MB DRAM
●  64 MB Compact Flash memory
●  Configurable up to 8000 MAC addresses (Layer 2)
●  Configurable up to 2000 MAC addresses (Layer 3)
●  Configurable up to 256 IGMP multicast groups (Layer 2)
●  Configurable up to 1000 IGMP groups and multicast routes (Layer 3)
●  Configurable up to 3,0 unicast routes (Layer 3)
●  Support jumbo frames up to 9018 bytes on Gigabit uplink port and mini-jumbo frame (system MTU) up to 1998 bytes on both 10/100 and 10/100/1000 ports

Connectors and cabling

●  10BASE-T ports:RJ-45 connectors,two-pair Category 3,4,or 5 Unshielded Twisted-Pair (UTP) cabling
●  100BASE-TX ports:RJ-45 connectors,two-pair Category 5 UTP cabling
●  1000BASE-T ports:RJ-45 connectors,four-pair Category 5 UTP cabling
●  1000BASE-SX,-LX/LH,-ZX SFP-based ports:LC fiber connectors (single/multimode fiber)
●  100BASE-LX10,-FX:LC fiber connectors (single/multimode fiber)

Indicators

●  Per-port status LED:Link integrity,disabled,activity,speed,full-duplex indications
●  System-status LED:System,link status,link duplex,link speed,indications

Dimensions (H x W x D)

●  Cisco IE-3000-4TC,Cisco IE-3000-4TC-E:6.0”W x 5.8”H x 4.4”D (152mm W x 147mm H x 112mm D)
●  Cisco IE-3000-8TC,Cisco IE-3000-8TC-E:6.0”W x 5.8”H x 4.4”D (152mm W x 147mm H x 112mm D)
●  Cisco IEM-3000-8TM=:3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
●  Cisco IEM-3000-8FM=:3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
●  Cisco IEM-3000-4SM=:3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
●  Cisco IEM-3000-8SM=:3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
●  Cisco IEM-3000-4PC=:3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
●  Cisco IEM-3000-4PC-4TC=:3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
●  Cisco PWR-IE50W-AC=:2.0”W x 5.8”H x 4.4”D (51mm W x 147mm H x 112mm D)
●  Cisco PWR-IE50W-AC-IEC=:2.0”W x 5.8”H x 4.4”D (51mm W x 147mm H x 112mm D)
●  Cisco PWR-IE65W-PC-AC=:2.6”W x 5.9”H x 4.6”D (66mm W x 150mm H x 117mm D)
●  Cisco PWR-IE65W-PC-DC=:2.6”W x 5.9”H x 4.6”D (66mm W x 150mm H x 117mm D)

Weight

●  Cisco IE-3000-4TC,Cisco IE-3000-4TC-E:4.4 lb (2 kg)
●  Cisco IE-3000-8TC,Cisco IE-3000-8TC-E:4.4 lb (2 kg)
●  Cisco IEM-3000-8TM=:2.2 lb (1 kg)
●  Cisco IEM-3000-8FM=:3.2 lb (1.45 kg)
●  Cisco IEM-3000-4SM=:2.5 lb (1.1 Kg)
●  Cisco IEM-3000-8SM=:3 lb (1.38 Kg)
●  Cisco IEM-3000-4PC=:2.4 (1.08 Kg)
●  Cisco IEM-3000-4PC-4TC=:2.5 (1.16 Kg)
●  Cisco PWR-IE50W-AC=:1.4 lb (.65 kg)
●  Cisco PWR-IE50W-AC-IEC=:1.4 lb (0.65kg)
●  Cisco PWR-IE65W-PC-DC=:2.6 (1.18 Kg)
●  Cisco PWR-IE65W-PC-AC=:2.7 (1.24 Kg)

Operating environment

Operating temperature:-40C to +75C

●  -40C to +70C (Vented Enclosure – 40 LFM Air Flow)
●  -40C to +60C (Sealed Enclosure – 0 LFM Air Flow)
●  -24C to +75C (Fan or Blower equipped Enclosure – 200 LFM Air Flow)
●  -40C to +85C (IEC 60068-2-2 Environmental Type Testing – 16 hours)
●  Storage temperature:-40C to +85C
●  Operating relative humidity:10 to 95% (non-condensing)
●  Operating altitude:Up to 13,0 ft (3963m)
●  Storage altitude:Up to 15,0 ft (4573m)

Mean Time Between Failures (MTBF)

●  Cisco IE-3000-4TC,Cisco IE-3000-4TC-E:363,942
●  Cisco IE-3000-8TC,Cisco IE-3000-8TC-E:329,451
●  Cisco IEM-3000-8TM=:926,999
●  Cisco IEM-3000-8FM=:264,689
●  Cisco IEM-3000-4SM=:8,887,990
●  Cisco IEM-3000-8SM=:7,732,890
●  Cisco IEM-3000-4PC=:1,494,990
●  Cisco IEM-3000-4PC-4TC=:1,291,440
●  Cisco PWR-IE50W-AC=:1,662,359
●  Cisco PWR-IE50W-AC-IEC=:1,662,359
●  Cisco PWR-IE65W-PC-DC=:2,468,430
●  Cisco PWR-IE65W-PC-AC=:2,488,401

 

 

جدول 4. مشخصات قدرت برای سوییچ های سیسکو IE 3000 سری

Description

Specification

Maximum power consumption

●  Cisco IE-3000-4TC,Cisco IE-3000-4TC-E:15.1W
●  Cisco IE-3000-8TC,Cisco IE-3000-8TC-E:15.7W
●  Cisco IEM-3000-8TM=:2.8W
●  Cisco IEM-3000-8FM=:10.1W
●  Cisco IEM-3000-4SM=:7.6W
●  Cisco IEM-3000-8SM=:12.2W
●  Cisco IEM-3000-4PC=:7.3W
●  Cisco IEM-3000-4PC-4TC=:7.9W

Input voltage and currents supported

●  Cisco IE-3000-4TC,Cisco IE-3000-8TC,18-60VDC
●  Cisco IEM-3000-4PC=,IEM-3000-4PC-4TC=:44-57V input
●  Cisco PWR-IE50W-AC=:100-240VAC/1.25A or 125-250VDC/1A
●  Cisco PWR-IE50W-AC-IEC=:100-240VAC/1.25A,50-60Hz
●  Cisco PWR-IE65W-PC-DC=:18-60VDC/4.3A
●  Cisco PWR-IE65W-PC-AC=:100-240VAC/1.4A or 125-250V/1A

Power rating

●  Cisco IE-3000-4TC,Cisco IE-3000-4TC-E:.05KVA
●  Cisco IE-3000-8TC,Cisco IE-3000-8TC-E:.05KVA

 

 

جدول .5 سیسکو IE 3000 DNA ملزومات

Feature

Description

Cisco DNA Center

Discovery,topology,inventory,software image management

Visibility

DNA assurance,Device 360

Day-zero network bring-up automation

Cisco Network Plug-and-Play application

Table 6.                           SFP transceivers support for Cisco IE 3000 Series switches

Part number

Specification

SFP type

Max distance

Cable type

Temp range*

DOM support

GLC-FE-100FX-RGD=

100BASE-FX

FE

2km

MMF

IND

Yes

GLC-FE-100LX-RGD

100BASE-LX10

FE

10km

SMF

IND

Yes

GLC-FE-T-I=

100BASE-T

FE

100m

Copper

IND

NA

GLC-FE-100FX=

100BASE-FX

FE

2km

MMF

COM

No

GLC-FE-100LX=

100BASE-LX10

FE

10km

SMF

COM

No

GLC-FE-100EX=

100BASE-EX

FE

40km

SMF

COM

No

GLC-FE-100ZX=

100BASE-ZX

FE

80km

SMF

COM

No

GLC-FE-100BX-D=

100BASE-BX10

FE

10km

SMF

COM

No

GLC-FE-100BX-U=

100BASE-BX10

FE

10km

SMF

COM

Yes

GLC-SX-MM-RGD=

1000BASE-SX

GE

550m

MMF

IND

Yes

GLC-LX-SM-RGD=

1000BASE-LX/LH

GE

550m/10km

MMF/SMF

IND

Yes

GLC-ZX-SM-RGD=

1000BASE-ZX

GE

70km

SMF

IND

Yes

GLC-BX40-U-I=

1000BASE-BX40

GE

40km

SMF

IND

Yes

GLC-BX40-D-I=

1000BASE-BX40

GE

40km

SMF

IND

Yes

GLC-BX40-DA-I=

1000BASE-BX40

GE

40km

SMF

IND

Yes

GLC-BX80-U-I=

1000BASE-BX80

GE

80km

SMF

IND

Yes

GLC-BX80-D-I=

1000BASE-BX80

GE

80km

SMF

IND

Yes

GLC-SX-MMD=

1000BASE-SX

GE

550m

MMF

EXT

Yes

GLC-LH-SMD=

1000BASE-LX/LH

GE

550m/10km

MMF/SMF

EXT

Yes

GLC-EX-SMD=

1000BASE-EX

GE

40km

SMF

EXT

Yes

GLC-ZX-SMD=

1000BASE-ZX

GE

70km

SMF

EXT

Yes

GLC-BX-D=

1000BASE-BX10

GE

10km

SMF

COM

Yes

GLC-BX-U=

1000BASE-BX10

GE

10km

SMF

COM

Yes

CWDM-SFP-xxxx=(8 freq)

CWDM 1000BASE-X

GE

SMF

COM

Yes

DWDM-SFP-xxxx=(40 freq)

DWDM 1000BASE-X

GE

SMF

COM

Yes

SFP-GE-S=

1000BASE-SX

GE

550m

MMF

EXT

Yes

SFP-GE-L=

1000BASE-LX/LH

GE

550m/10km

MMF/SMF

EXT

Yes

SFP-GE-Z=

1000BASE-ZX

GE

70km

SMF

EXT

Yes

GLC-SX-MM=

1000BASE-SX

GE

550m

MMF

COM

No

GLC-LH-SM=

1000BASE-LX/LH

GE

550m/10km

MMF/SMF

COM

No

GLC-ZX-SM=

1000BASE-ZX

GE

70km

SMF

COM

Yes

GLC-TE=

1000BASE-T

GE

100m

Copper

EXT

NA

GLC-T=

1000BASE-T

GE

100m

Copper

COM

NA

جدول 7 مشخصات سازگاری

Description

Specification

Standard safety certifications

●  UL 60950-1
●  CSA C22.2 No. 60950-1
●  TUV/GS to EN 60950-1
●  CB to IEC 60950-1 with all country deviations
●  NOM

Mechanical stability

●  IEC 60628-2-27 Shock 20g (operational),30g (nonoperational)

Electromagnetic emissions

●  FCC Part 15 Class A
●  EN 55022
●  CISPR 22
●  CISPR11
●  VCCI Class A
●  AS/NZS 3548 Class A
●  CNS 13438 Class A
●  KN 22 Class A

Electromagnetic immunity

●  EN 55024
●  AS/NZS CISPR 24
●  KN 24
●  IEC/EN 61000-4-2 (Electro Static Discharge)
●  IEC/EN 61000-4-3 (Radiated Immunity)
●  IEC/EN 61000-4-4 (Fast Transients)
●  IEC/EN 61000-4-5 (Surge)
●  IEC/EN 61000-4-6 (Conducted Immunity)
●  IEC/EN 61000-4-8 (Power Frequency Magnetic Field Immunity)
●  IEC/EN 61000-4-9 (Pulse Magnetic Field Immunity)
●  IEC/EN 61000-4-10 (Oscillatory Magnetic Field Immunity)
●  IEC/EN 61000-4-11 (AC power Voltage Immunity)
●  IEC/EN 61000-4-16 (Low Frequency Conducted CM Disturbances)
●  IEC/EN 61000-4-17 (Ripple on DC Input Power)
●  IEC/EN 61000-4-18 (Damped Oscillatory Wave)
●  IEC/EN 61000-4-29 (Voltage Dips Immunity,DC power)
●  IEEE C37.90 (Surge)
●  IEEE C37.90.1 (Fast Transients)
●  IEEE C37.90.2 (Radiated Immunity)
●  IEEE C37.90.3 (Electro Static Discharge)

Industry specifications

●  EN 61131-2 Programmable Controllers (EMC/EMI,environmental,mechanical)
●  IEEE 1613 Power Station and Substation Networking Devices
●  IEC 61850-3 Power Station and Substation Communication Networks and Systems
●  EN 61326-1 Electrical Equipment for Measurement,Control and Laboratory Use –EMC
●  EN 61000-6-1 Immunity for Light Industrial Environments
●  EN 61000-6-2 Immunity for Industrial Environments
●  EN 61000-6-4 Emissions for Industrial Environments
●  TS 61000-6-5 EMC Immunity for Power Station and Substation
●  EN 50155 Railway,Electronic Equipment on Rolling Stock (EMI/EMC,environmental,mechanical)
●  EN 50121-3-2 Railway,Electromagnetic Compatibility on Rolling Stock
●  EN 50121-4 Railway,Emission and Immunity of Signaling and Telecommunications Apparatus
●  EN 60945 Maritime Navigation and Radio-communication Equipment and Systems
●  IEC 60533 Shipboard Electrical and Electronic Installation EMC
●  Marine Type Approval (BV,DNV,Korean Register,Lloyd Register)
●  NEMA TS-2 (EMC,environmental,mechanical)
●  ABB Industrial IT certification
●  ODVA Industrial EtherNet/IP support
●  PROFINETv2 support
●  Directive 2011/65/EU RoHS
●  IP20

Hazardous locations

●  UL/CSA 60079-0,-15 (Class 1,Div 2 A-D) (requires cabinet enclosure)
●  EN 60079-0,-15 ATEX Certification (Class 1,Zone 2 A-D) (requires cabinet enclosure)
●  IEC 60079-0,-15 (Test report only) (requires cabinet enclosure)
●  UL 508
●  CSA C22.2 No. 142

Compliance marking

●  UL/CSA
●  CE (Europe)
●  C-Tick (Australia/New Zealand)
●  KCC (Korea)
●  ANATEL (Brazil)
●  China RoHS

Operating temperature

●  -40 C to +70 C (vented enclosure operating)
●  -40 C to +60 C (sealed enclosure operating)
●  -34 C to +75 C (fan or blower-equipped enclosure operating)
●  -40 C to +85 C (IEC Environmental Type Testing,16 hours)
●  Operational altitude:Up to 13,0 ft

Storage temperature

●  -40 C to +85 C (storage temperature)
●  Storage altitude:Up to 15,0 ft

Humidity

●  Relative humidity:5% to 95% non-condensing

Telco

●  Common Language Equipment Identifier (CLEI) code

Warranty

●  Five year limited warranty

.

جدول 8. خدمات سیسکو و برنامه های پشتیبانی

Service and support

Features

Benefits

Advanced Services

●  Cisco Total Implementation Solutions (TIS),available direct from Cisco
●  Cisco Packaged TIS,available through resellers
●  Cisco SMARTnet®and SMARTnet Onsite support,available direct from Cisco
●  Cisco Packaged SMARTnet support program,available through resellers
●  Cisco SMB Support Assistant
●  Project management
●  Site survey,configuration,and deployment
●  Installation,text,and cutover
●  Training
●  Major moves,adds,and changes
●  Design review and product staging
●  Access to software updates 24 hours
●  Web access to technical repositories
●  Telephone support through the Cisco Technical Assistance Center (TAC)
●  Advance replacement of hardware parts
●  Supplements existing staff
●  Helps ensure that functions meet needs
●  Mitigates risk
●  Helps enable proactive or expedited issue resolution
●  Lowers TCO by taking advantage of Cisco expertise and knowledge
●  Minimizes network downtime

 

سفارش اطلاعات

جدول 9 اطلاعات سفارشي را براي سيسكو IE 3000 Series ارائه مي دهد.

جدول 9. اطلاعات سفارش برای سیسکو IE 3000 سری

 

Description

Specification

IE-3000-4TC

●  Industrial Ethernet switch
●  4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port,1 port active)
●  Each switch supports 2 Cisco modules,1 Cisco IEM-3000-8FM=module,or 1 Cisco IEM-3000-8TM=module and 1 Cisco IEM-3000-8FM=module
●  Layer 2 LAN Base image installed

IE-3000-8TC

●  Industrial Ethernet switch
●  8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port,1 port active)
●  Each switch supports 2 Cisco IEM-3000-8TM=modules,1 Cisco IEM-3000-8FM=module,or 1 Cisco IEM-3000-8TM=module and 1 Cisco IEM-3000-8FM=module
●  Layer 2 LAN Base image installed

IE-3000-4TC-E

●  Industrial Ethernet switch
●  4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port,1 port active)
●  Each switch supports 2 Cisco modules,1 Cisco IEM-3000-8FM=module,or 1 Cisco IEM-3000-8TM=module and 1 Cisco IEM-3000-8FM=module
●  Layer 3 IP Services image installed

IE-3000-8TC-E

●  Industrial Ethernet switch
●  8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port,1 port active)
●  Each switch supports 2 Cisco IEM-3000-8TM=modules,1 Cisco IEM-3000-8FM=module,or 1 Cisco IEM-3000-8TM=module and 1 Cisco IEM-3000-8FM=module
●  Layer 3 IP Services image installed

IEM-3000-8TM=

●  Expansion Copper module for Cisco IE-3000-4TC and IE-3000-8TC switches
●  8 10/100 TX ports

IEM-3000-8FM=

●  Expansion Fiber module for Cisco IE-3000-4TC and IE-3000-8TC switches
●  8 100 FX ports

IEM-3000-4SM=

●  Expansion SFP module for Cisco IE-3000-4TC and IE-3000-8TC switches
●  4 100M SFP ports

IEM-3000-8SM=

●  Expansion SFP module for Cisco IE-3000-4TC and IE-3000-8TC switches
●  8 100M SFP ports

IEM-3000-4PC=

●  Expansion PoE/PoE+ module for Cisco IE-3000-4TC and IE-3000-8TC switches
●  4 10/100 PoE/PoE+ ports
●  External PoE power source (44-57 VDC for PoE/50-57 VDC for PoE+)

IEM-3000-4PC-4TC=

●  Expansion PoE/PoE+ module for Cisco IE-3000-4TC and IE-3000-8TC switches
●  4 non-PoE ports and 4 10/100 PoE/PoE+ ports
●  External PoE power source (44-57 VDC for PoE/50-57 VDC for PoE+)

PWR-IE50W-AC=

●  Expansion power module for IE-3000-4TC and IE-3000-8TC switches

PWR-IE50W-AC-IEC=

●  Expansion power module for IE-3000-4TC and IE-3000-8TC switches

PWR-IE65W-PC-AC=

●  AC-DC,54VDC power module to support 65 watts for PoE/PoE+ modules

PWR-IE65W-PC-DC=

●  DC-DC,54VDC power module to support 65 watts for PoE/PoE+ modules

CAB-SM-LCSC-1M

●  1m-fiber single-mode LC-to-SC connectors

CAB-SM-LCSC-5M

●  5m-fiber single-mode LC-to-SC connectors

CF-IE3000=

●  IE 3000 Compact Flash

PWR-IE3000-CLP=

●  IE 3000 Power Transformer Spare connector clip

PWR-IE3000-CNCT=

●  IE 3000 Power Spare connector

LPNL-IE3000=

●  IE 3000 Left Panel Spare

RPNL-IE3000=

●  IE 3000 Right Panel Spare

DINCLP-IE3000=

●  Din-rail clip 4 pack Spare

BMP-IE3000=

●  Din-rail clip bumper 4 pack Spare

STK-RACKMNT-2955=

●  Din-rail adapter for rack mounting

IE-SW-SPARE

●  Spare IOS software upgrade part number (L2 to L3 features)

IE3000-DNA-E-L

●  DNA Essentials license

IE3000-DNA-E-L-3Y

●  DNA Essentials 3-year term license option

IE3000-DNA-E-L-5Y

●  DNA Essentials 5-year term license option

 

شکل 1:ابعاد ماژول پایه IE3000

شکل 1: ابعاد ماژول پایه IE3000

شکل 2. ابعاد ماژول گسترش IE3000

شکل 2. ابعاد ماژول گسترش IE3000

 

برای اطلاعات بیشتر به این آدرس مراجعه نمایید.

دیدگاهها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین نفری باشید که دیدگاهی را ارسال می کنید برای “سوییچ سیسکو سری Industrial Ethernet 3000”

نشانی ایمیل شما منتشر نخواهد شد.بخش‌های موردنیاز علامت‌گذاری شده‌اند *

محصولات مرتبط

0
X